Add page 6 to Favourites. Refer to page 10 for descriptions of how to manually record images on the SD memo- ry card. When this button is clicked, the log list will be dis- played and images saved on the SD memory card can be played.
Refer to page 17 for further information about the log list and of how to play images on the SD memory card. The selected operation will start. Click the [STOP] button to stop the operation. Auto track:Automatically tracks an object in the shooting area.
It is recommended to use the auto tracking function with setting the zoom ratio to the WIDE side. Even when the camera is operated for zooming or focusing, the camera continues panning.
However, panning will stop when the zoom button x1. When a thumbnail image is clicked, the camera moves to the respective position and live images will be displayed on the Live page. When a thumbnail image is clicked, the camera moves to the respective posi- tion and live images will be displayed on the Live page. Add page 7 to Favourites. In this case, stop the current operation and carry out map-shot again. In this case, the camera will not move when the thumbnail image is clicked.
For example, when pre- set position 3 is unregistered, the thumbnail image of preset position 2 will be displayed as the thumb- nail image of preset position 3.
The camera will not move when the thumbnail image of preset position 3 is clicked. It may some- times be slightly different. Zoom and focus can be adjusted by right-clicking. Zoom can also be adjusted using the mouse wheel.! H next to the preset position number indicates the home posi- tion. When Home position is selected, the camera will move to the home position.
When the preset ID is registered for a preset posi- tion, the registered preset ID will be displayed next to the preset position number.
When this button is clicked, the alarm output terminal will be reset and this button will disappear. To return to the Live page, press the [Esc] key. When dis- playing images on a full screen, the audio transmis- sion button will become unavailable. The picture will be displayed on a newly opened window. When right-clicking on the displayed image, the pop- up menu will be displayed. The displayed image can be saved on the PC by selecting Save from the pop-up menu.
Add page 8 to Favourites. This button will be displayed only when Mic input or Interactive is selected for Audio mode on the setup menu. This button will be displayed only when Audio output or Interactive is selected for Audio mode on the setup menu. When this button is clicked, the button will turn into the button and audio from the PC will not be heard.
When 5 minutes have passed, the audio transmission function will be can- celed and the audio reception function will automati- cally be turned on.
To turn the audio transmission function on, click the transmission button again. When the SD recording starts, this indicator will light red. When the SD recording stops, this indicator will go off. This indicator will be displayed only when Manual is selected for Save trigger on the setup menu. The current time and date will be displayed at the selected position in the time and date format set on the setup menu. Click a desired point in the main area on the Live page that is to be the center of the angle of view.
The camera moves to adjust the position in order to set the clicked point as the center. When selecting an area in the main area by drag- ging the mouse, the selected area will be located at the center of the main area. In this case, the zoom ratio will be adjusted automat- ically. Zoom can be adjusted using the mouse wheel. See also: Service Manual , Installation Manual.
Network Camera Network Operating Instructions. Before attempting to connect or operate this product,. Table of Contents. Previous Page. Next Page. Panasonic operating instructions network camera wv-ns 79 pages. Panasonic operating instructions network camera wv-ns, wv-nw, wv-ns, wv-nw 21 pages. Wv-ns series super dynamic iii day-night dome network camera 2 pages.
The default user name and password are as setup software in the address box of the browser. Page 5 About the "Live" page! This button will be displayed The current time and date will be displayed at the only when "Mic input" Note: When operated by a lower access level user, images displayed on the screen may be changed temporarily.
This does not affect operation of the camera. Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. Page Action At An Alarm Occurrence Notify of alarm occurrences to the designated IP addresses Panasonic alarm protocol This function is available only when a Panasonic device, such as the network disk recorder, is connected to the sys- tem.
When "ON" is selected for "Panasonic alarm protocol", the connected Panasonic device will be notified that the camera is in the alarm state. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Page 16 [Download] button Click this button to download all logs of the selected log list as a file onto the PC. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed.
Before downloading images, designate the destination directory in advance. The setup menu is only operable by users whose access level is "1. How to display the setup menu Step 1 Display the "Live" Page 23 [Network setup] button Click this button to display the "Network setup" page. Page 27 SD memory card becomes full.
When the "E-mail notification" function or the Default: OFF "Panasonic alarm protocol" function is used to provide notification of the remaining space of the SD memory Note: card, select a level to be notified at from the following.
Page 30 Possible number of images that can be saved on the SD memory card as indications Important: The numbers on the following table are just indications. They are not actual numbers of images that can be saved on the SD memory card. Numbers will differ according to photographic subject, settings relating to the SD memory card, etc. When more than 5 logs are filed, the older logs will be overwritten by the newer logs. Not use — — Images: Images will not be saved.
Page 37 Multicast: No concurrent access limitation for a cam- Important: era. In this mum concurrent access number. Page 38 Configure the settings relating to the camera title and the camera operations [Cam Function] Click the [Cam Function] tab on the "Camera setup" page. When using an optional inner cover WV-Q, ON desktop : Select this when the camera is to be upper side of images will be hidden become black installed with the dome side up.
OFF: The camera will always be in the color mode. Refer to page 44 for descriptions of how to mask. It will take for around 7 seconds to complete Click this button to close the "Image Adjust" setup the white balance adjustment. Page 44 Set mask areas When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas.
Step 1 Step 3 Display the setup menu of "Image Adjust". Page 45 Configure the settings relating to the preset positions "Preset No. Page 46 [Preset No. Click this button to close the "Preset No. Configure the settings relating to the auto pan function "Auto Pan" Up to 8 privacy zones can be set. Configure the settings relating to audio [Audio] Click the [Audio] tab on the "Camera setup" The entered camera title will be displayed on a multi-screen.
When "ON" is selected, alarm actions will be Determine whether or not to receive a terminal alarm 2 performed between multiple cameras. Page 53 Configure the settings relating to the camera action at an alarm occurrence Click the [Alarm] tab on the "Alarm setup" page. Refer to pages 52, 55 and 56 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal. Page 54 [Command alarm] Select an action to be taken when a command alarm is detected from the following.
OFF: Does not take any action even when a command alarm is detected. Page 55 Configure the settings relating to the alarm image Click the [Alarm] tab on the "Alarm setup" page. The alarm image will be transmitted to an FTP server. Page 56 Configure the settings relating to the alarm out terminal Click the [Alarm] tab on the "Alarm setup" page. The settings for the alarm output ter- minal can be configured only when "Alarm output" The VMD areas can be set for each preset position up to 64 areas.
When motion is detected in the set area, the alarm action will be performed.
0コメント