Hi, Do you mean to disable dynamic ports? The socket pool is automatically enabled with default settings. Monday, December 24, AM. Thank you. I have understood, that DNS service uses dynamic ports to protect against DNS cache poisoning attack and there is a way to control dynamic ports.
I just want to hide a version information. Tuesday, December 25, AM. Hi, Just checking in to see if the information provided was helpful. Please let us know if you would like further assistance. Best Regards, Travis Please remember to mark the replies as an answers if they help. Tuesday, January 1, AM. A dedicated user account is a user account whose sole purpose is to supply DHCP servers with credentials for DNS dynamic update registrations. Assume that you have created a dedicated user account and configured DHCP servers with the account credentials.
The dedicated user account should be created in the forest where the primary DNS server for the zone to be updated resides. The dedicated user account can also be located in another forest. However, the forest that the account resides in must have a forest trust established with the forest that contains the primary DNS server for the zone to be updated.
When the DHCP Server service is installed on a domain controller, you can configure the DHCP server by using the credentials of the dedicated user account to prevent the server from inheriting, and possibly misusing, the power of the domain controller. When the DHCP Server service is installed on a domain controller, it inherits the security permissions of the domain controller.
The service also has the authority to update or delete any DNS record that is registered in a secure Active Directory-integrated zone. This includes records that were securely registered by other Windows-based computers, and by domain controllers. The dynamic update functionality that is included in Windows follows RFC By default, the name that is used in the DNS registration is a concatenation of the computer name and the primary DNS suffix.
Right-click the connection that you want to configure, and then click Properties. This default configuration causes the client to request that the client register the A resource record and the server register the PTR resource record. If the DHCP server is configured to register DNS records according to the client's request, the client registers the following records:.
To configure the client to make no requests for DNS registration, click to clear the Register this connection's address in DNS check box. A client is multihomed if it has more than one adapter and an associated IP address. If you do not want the client to register all its IP addresses, you can configure it not to register one or more IP addresses in the network connection properties. You can also configure the computer to register its domain name in DNS.
For example, if you have a client that is connected to two different networks, you can configure the client to have a different domain name on each network. Click to select the Enable DNS dynamic updates according to the settings below check box to enable DNS dynamic update for clients that support dynamic update. This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.
For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows. By default, dynamic updates are configured on Windows Server-based clients. To disable dynamic updates for all network interfaces, follow these steps:.
Click Start , click Run , type regedit , and then click OK. Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Contents Exit focus mode. Please rate your experience Yes No. Any additional feedback? Note The update process for Windows-based computers that use DHCP to obtain their IP address is different from the process that is described in this section.
The update process that is described in this section assumes that Windows installation defaults are in effect. Besides the full computer name, or the primary name, of the computer, you can configure additional connection-specific DNS names and optionally register or update them in DNS. Note Names are not removed from DNS zones if they become inactive or if they are not updated within the update interval of twenty-four hours. To avoid this issue, deploy DHCP servers and domain controllers on separate computers, or configure the DHCP server to use a dedicated user account for dynamic updates.
Note The secure dynamic update functionality is supported only for Active Directory-integrated zones. Note If you are using multiple DHCP servers for fault tolerance and secure dynamic updates, add each server to the DnsUpdateProxy global security group. Important This section, method, or task contains steps that tell you how to modify the registry. If a dynamic registration request is submitted to a secondary DNS server that maintains a read-only copy of the zone, the request is forwarded to the primary DNS server.
Default settings assume that clients will register "A" records themselves, and the DHCP server will register PTR records, but legacy and non-Windows clients may not support dynamic registration. Dynamic DNS registrations can be secure and non-secure.
Although non-secure registrations conform to the RFC standard, it has a major drawback of allowing anyone on the network—even those nodes never authenticated by domain controllers—to write to the zone file. This does not necessarily mean that they do not have write access to any other record in the zone file. Non-secure updates are suitable for smaller environments that are isolated from the outside world.
Usually this defaults to Kerberos. DNS zones that are integrated with Active Directory can be configured to allow secure-only registrations, where anonymous parties are not allowed to introduce their addresses into the system. Dynamic registration solves the problem of adding records to the zone on the fly, but as you might be thinking by now, this led to another problem of cleaning up these registrations once they are no longer associated with the client who registered them.
Things like hard resets, blue screens, or freezes of a client computer are bound to leave behind registrations in the system.
0コメント